- TOP
- TCG (Trochoid Cam Gear) Line-up
- TCG Runner Stainless-steel type, CRS&CPS series
TCG Runner Stainless-steel type, CRS&CPS series
This Cam Rack & Roller Pinion is made of stainless steel exactly taking over the features of Zero-backlash, high accuracy, low friction, low dusting, etc. of TCG Series.
This product has excellent corrosion resistance and anti-rust effect.
![TCG Runner Stainless-steel type, CRS&CPS series TCG Runner Stainless-steel type, CRS&CPS series](https://20526724.fs1.hubspotusercontent-na1.net/hub/20526724/hubfs/kamo_October2023/images/product_tcg_suscra.png?width=1080&height=882&name=product_tcg_suscra.png)
Highlights
Zero-Backlash
The teeth always mesh via two or three portions and eliminate backlash when rotated in one or another direction.
Extended length line and high speed driving
Extendable with use of the connection jig “CJ”. And, capable of high speed driving of 180 m/min or more.
High Accuracy
The combination of cam gear and roller pinion makes a positioning accuracy and feeding accuracy (rotation-linearity ratio) as nearly as the ball-screw.
Low noise・Low vibration
Rollers of Pinion supported by bearings roll smoothly on the trochoid gear. Thereby tooth striking noise, rotating noise and also vibration are reduced.
Low dust
Due to the smooth rotation, the structure dispenses with a least amount of heat and dust generated and cope with a clean room operation.
Model
Roller Pinion
*For the hold-down plate lock bolt, because the tap drill hole is a through hole, there is no specification for bolts with gas-vent hole.
CPS | 1 |
---|---|
1610 | 1 |
A | |
A | 3 |
A | 4 |
A | 5 |
1.Product Name | CPS series |
---|---|
2.Frame number | 1610,2010,2510 |
3.Sealed grease | A:Standard G:Supplied grease *Sealed grease: If G (supplied grease) is selected, please note that the specification values may not be satisfied depending on the properties of the grease. |
4.Precision cleaning | A:No S:Yes *Precision cleaning: If S (Yes) is selected: Vacuum packing is done after rust-preventive treatment is provided. |
5.Lock bolt | A:Standard B:With gas-vent holes |
CPS | 1 |
---|---|
3212 | 2 |
A | |
A | 3 |
A | 4 |
A | 5 |
1.Product Name | CPS series |
---|---|
2.Frame number | 3212,4012 |
3.Sealed grease | A:Standard G:Supplied grease *Sealed grease: If G (supplied grease) is selected, please note that the specification values may not be satisfied depending on the properties of the grease. |
4.Precision cleaning | A:No S:Yes *Precision cleaning: If S (Yes) is selected: Vacuum packing is done after rust-preventive treatment is provided. |
5.Lock bolt | A:Standard *Lock bolts are provided only to the standard specifications because gas is released due to the structure of the clamping tool. |
Cam Rack
CRS | 1 |
---|---|
1610 | 2 |
A | |
F | 3 |
AL480 | 4 |
1 | 5 |
1.Product Name | CRS series |
---|---|
2.Frame number | 1610,2010,2510,3212,4012 |
3.Mounting hole | F:Side mount hole only (standard) Y:+ Tap at bottom surface |
4.Length of Cam Rack | For the length of the cam rack,(“Cutting Dimensions of Cam Rack” on P.21.) *Other than the cutting dimensions table are also available. Please contact. |
5.Precision cleaning | 1:No (standard) 2:Yes + Standard grease is applied in the packing process. Alvania Grease S2 (Shell Lubricants Japan) is applied. 3:Yes + Supplied grease is applied in the packing process. *For the reason that the cam rack is made of martensitic stainless steel, the following rust-preventive treatment is provided to all over the surfaces in the packing process. *Precision cleaning: If Yes is selected: Vacuum packing is done after rust-preventive treatment is provided. |
Cam Rack Connection Jig
*The connection jig is shared with CRA and CRC Series.
CJ | 1 |
---|---|
16 | 2 |
B |
1.Product Name | CJ series |
---|---|
2.Frame number | 16,20,25,32,40 |
Materials
The materials of the parts used for the products are as follows.
Cam Rack
Martensitic stainless steel
Roller pinion
Pinion body | Austenitic stainless steel |
Hold-down plate | |
Bolt | |
Clamping tool | |
Roller | Martensitic stainless steel |
Oil seal | Nitrile rubber (NBR) |
Connection jig
Carbon steel for structural use
Specifications
CPS/CRS series | ||||
---|---|---|---|---|
CPS1610A | CPS2010A | CPS2510A | CPS3212A | CPS4012A |
CRS1610A | CRS2010A | CRS2510A | CRS3212A | CRS4012A |
Common spec. | Basic dynamic rated load | N |
---|---|---|
Maximum working load | N | |
Allowable static rated load | N | |
Basic dynamic rated torque *1 | N・m | |
Maximum working torque *1 | N・m | |
Allowable static rated torque *1 | N・m | |
Displacement distance of pinion per rotation | mm/revolution | |
Max pressure angle | ° | |
Module | mm | |
Roller Pinion | Number of tooth | teeth |
Diameter of pitch circle *2 | mm | |
Mass weight | kg | |
Inertia moment | ×10-4 kg・m2 | |
Cam Rack | Pitch | mm |
Predetermined length | mm | |
Number of tooth | teeth | |
Mass weight | kg | |
Outline Drawing | Roller pinion / Cam Rack | |
Connection Jig | ||
CAD Data | ||
Catalog | ||
Instruction Manual |
1000 | 1500 | 2200 | 3600 | 6000 |
1700 | 2200 | 3100 | 6600 | 9000 |
2000 | 3000 | 4400 | 7200 | 10940 |
25.5 | 47.7 | 87.5 | 220.0 | 458.4 |
43.3 | 70.1 | 123.4 | 403.3 | 687.6 |
59.9 | 95.5 | 175.1 | 440.0 | 836.0 |
160 | 200 | 250 | 384 | 480 |
30.7 | 30.1 | 30.7 | 30.1 | 30.0 |
4.75 | 6 | 7.5 | 9.5 | 12 |
10 | 10 | 10 | 12 | 12 |
50.9 | 63.7 | 79.6 | 122.2 | 152.8 |
0.81 | 1.5 | 2.4 | 6.8 | 16 |
4.56 | 12.5 | 29.6 | 200 | 728 |
16 | 20 | 25 | 32 | 40 |
992 | 1000 | 1000 | 992 | 1000 |
62 | 50 | 40 | 31 | 25 |
2.2 | 4.1 | 5.4 |
8.3 |
13 |
*1 Basic dynamic rated torque (maximum working torque, allowable static rated torque) is torque observed when applying basic dynamic rated load (maximum working load, allowable static rated load) to roller pinion along diameter formed by pitch circle
*2 The indicated pitch circle diameter values are theoretical, not representing the actual pitch circle diameters of the respective roller pinions
TCG (Trochoid Cam Gear) Line-up
CRA&CPA / CRC&CPC series
![TCG Runner](https://20526724.fs1.hubspotusercontent-na1.net/hubfs/20526724/kamo_October2023/images/product_tcg_cra-1-1.png)
- Frame number
-
CRA&CPA:1010,210,1610,2010,2510,3212
CRC&CPC:3212,4012
- Maximum working load(N)
-
CRA&CPA:250 - 6600
CRC&CPC:10500 - 18000
CRA&CPA:1010,210,1610,2010,2510,3212
CRC&CPC:3212,4012
CRA&CPA:250 - 6600
CRC&CPC:10500 - 18000
RGF&CPA / RFC&CPC series
![TCG Ring(Full Ring),RGF&CPA/RFC&CPC Series](https://20526724.fs1.hubspotusercontent-na1.net/hubfs/20526724/kamo_October2023/images/product_tcg_rgf_02-1-1-1%20(1).png)
- Frame number
-
RGF&CPA:1010,1210,1610,2510,3212
RFC&CPC:3212,4012
- Maximum working torque(N・m)
-
RGF&CPA:11 - 1930
RFC&CPC:1800 - 5300
RGF&CPA:1010,1210,1610,2510,3212
RFC&CPC:3212,4012
RGF&CPA:11 - 1930
RFC&CPC:1800 - 5300
(Circular Arc Ring),UGD&CPA/UDC&CPC series
![TCG Ring Internal-gear type(Circular Arc Ring), UGD&CPA/UDC&CPC series](https://20526724.fs1.hubspotusercontent-na1.net/hubfs/20526724/kamo_October2023/images/product_tcg_ugf3-2%20(1).png)
- Frame number
-
UGD&CPA:1610,2510,3212
UDC&CPC:3212,4012
- Maximum working torque(N・m)
-
UGD&CPA:535-9600
UDC&CPC:6910-32000
UGD&CPA:1610,2510,3212
UDC&CPC:3212,4012
UGD&CPA:535-9600
UDC&CPC:6910-32000