• There are no suggestions because the search field is empty.
Contact Us

TCG Runner Stainless-steel type, CRS&CPS series

This Cam Rack & Roller Pinion is made of stainless steel exactly taking over the features of Zero-backlash, high accuracy, low friction, low dusting, etc. of TCG Series.

This product has excellent corrosion resistance and anti-rust effect.


TCG Runner Model Calculator
Technical Information
TCG Runner Stainless-steel type, CRS&CPS series

Highlights

Zero-Backlash

The teeth always mesh via two or three portions and eliminate backlash when rotated in one or another direction.

Extended length line and high speed driving

Extendable with use of the connection jig “CJ”. And, capable of high speed driving of 180 m/min or more.

High Accuracy

The combination of cam gear and roller pinion makes a positioning accuracy and feeding accuracy (rotation-linearity ratio) as nearly as the ball-screw.

Low noise･Low vibration

Rollers of Pinion supported by bearings roll smoothly on the trochoid gear. Thereby tooth striking noise, rotating noise and also vibration are reduced.

Low dust

Due to the smooth rotation, the structure dispenses with a least amount of heat and dust generated and cope with a clean room operation.

Model

Roller Pinion

*For the hold-down plate lock bolt, because the tap drill hole is a through hole, there is no specification for bolts with gas-vent hole.

CPS 1
1610 1
A
A 3
A 4
A 5
1.Product Name CPS series
2.Frame number 1610, 2010, 2510
3.Sealed grease

A: Standard

G: Supplied grease

*Sealed grease: If OP. G (supplied grease) is selected, please note that the specification values may not be satisfied depending on the properties of the grease.
4.Precision cleaning

A: No

S: Yes

*Precision cleaning: If OP. S (Yes) is selected: Vacuum packing is done after rust-preventive treatment is provided.
5.Lock bolt

A: Standard

B: With gas-vent holes
Noted; Product name that include the "S + 3 digit" number is special order product. So please note that we cannot sell it to customers who have not purchased same product before.
CPS 1
3212 2
A
A 3
A 4
A 5
1.Product Name CPS series
2.Frame number

3212, 4012
3.Sealed grease

A: Standard

G: Supplied grease

*Sealed grease: If OP. G (supplied grease) is selected, please note that the specification values may not be satisfied depending on the properties of the grease.
4.Precision cleaning

A: No

S: Yes

*Precision cleaning: If OP. S (Yes) is selected: Vacuum packing is done after rust-preventive treatment is provided.
5.Lock bolt

A: Standard

*Lock bolts are provided only to the standard specifications because gas is released due to the structure of the clamping tool.
Noted; Product name that include the "S + 3 digit" number is special order product. So please note that we cannot sell it to customers who have not purchased same product before.

Cam Rack

CRS 1
1610 2
A
F 3
L992 4
1 5
1.Product Name

CRS series
2.Frame number

1610, 2010, 2510, 3212, 4012
3.Mounting hole

F: Side mount hole only

Y: + Tap at bottom surface
4.Length of Cam Rack

Please refer to the dimension table for Cutting.

*Can also handle short rack cuts not specified in the dimension table.
5.Precision cleaning

1: No

2: Yes + Standard grease is applied in the packing process.

    Alvania Grease S2 (Shell Lubricants Japan) is applied.

3: Yes + Supplied grease is applied in the packing process.

 

*For the reason that the cam rack is made of martensitic stainless steel, the following rust-preventive treatment is provided to all over the surfaces in the packing process.

 

*Precision cleaning: If Yes is selected: Vacuum packing is done after rust-preventive treatment is provided.
Noted; Product name that include the "S + 3 digit" number is special order product. So please note that we cannot sell it to customers who have not purchased same product before.

Connection Jig

CJ 1
16 2
B
1.Product Name

CJ series
2.Frame number 16, 20, 25, 32, 40

Materials

The materials of the parts used for the products are as follows.

　

Cam Rack：Martensitic stainless steel

　

Roller pinion：

Pinion body Austenitic stainless steel
Hold-down plate
Bolt
Clamping tool
Roller Martensitic stainless steel
Seal Nitrile rubber (NBR)

　

Connection jig：Carbon steel for structural use

Specifications

ModeItems
 　
Roller Pinion
Cam Rack
CPS/CRS series
CPS1610A CPS2010A CPS2510A CPS3212A CPS4012A
CRS1610A CRS2010A CRS2510A CRS3212A CRS4012A
Common spec. Basic dynamic rated load N
Maximum working load N
Allowable static rated load N
Basic dynamic rated torque *1 N･m
Maximum working torque *1 N･m
Allowable static rated torque *1 N･m
Displacement distance of pinion per rotation mm/revolution
Max pressure angle °
Module mm
Roller Pinion Number of tooth teeth
Diameter of pitch circle *2 mm
Mass weight kg
Inertia moment ×10-4 kg・m2
Cam Rack Pitch mm
Predetermined length mm
Number of tooth teeth
Mass weight kg
Outline Drawing Roller pinion / Cam Rack
Connection Jig
1000 1500 2200 3600 6000
1700 2200 3100 6600 9000
2000 3000 4400 7200 10940
25.5 47.7 87.5 220.0 458.4
43.3 70.1 123.4 403.3 687.6
59.9 95.5 175.1 440.0 836.0
160 200 250 384 480
30.7 30.1 30.7 30.1 30.0
4.75 6 7.5 9.5 12
10 10 10 12 12
50.9 63.7 79.6 122.2 152.8
0.81 1.5 2.4 6.8 16
4.56 12.5 29.6 200 728
16 20 25 32 40
992 1000 1000 992 1000
62 50 40 31 25
2.2 4.1 5.4

8.3

 13

*1 Basic dynamic rated torque (maximum working torque, allowable static rated torque) is torque observed when applying basic dynamic rated load (maximum working load, allowable static rated load) to roller pinion along diameter formed by pitch circle

*2 The indicated pitch circle diameter values are theoretical, not representing the actual pitch circle diameters of the respective roller pinions

Please feel free to contact us for product information and technical consultation.

Contact Us