- TOP
- Thin Differential Reducer Line-up
- Lightweight Differential Reducer PSL series
Lightweight Differential Reducer PSL series
The lightest differential speed reducer compared to other same-sized precision speed reducers that use aluminum as the main component.
This reducer is useful for robots, AGVs, and other equipment requiring lightweight and thin profiles.
![Lightweight Differential Reducer PSL series Lightweight Differential Reducer PSL series](https://20526724.fs1.hubspotusercontent-na1.net/hub/20526724/hubfs/kamo_October2023/images/product_gensoku_psl.png?width=1080&height=882&name=product_gensoku_psl.png)
Highlights
Ultra-flat and compact design
The adoption of a differential reduction mechanism and a thin cross-roller bearing has enabled an ultra-flat form. This contributes to the realization of contraction and compactification of equipment.
Lightweight
New lightweight model that uses aluminum for its main components, reducing its weight by about 30% compared to its predecessor. Example:PSR70FCA:0.62kg -> PSL70FCA:0.42kg
High rigidity
High contact ratio and load dispersion have realized extremely high rigidity.
High Accuracy
High transmission accuracy made possible through multiple meshing of high-accuracy rollers and high-precision trochoidal gears.
Small backlash
High-precision positioning with a backlash under 3 arcmins achieved by optimizing each component’s clearance.
High Efficiency
Appropriate pressure angle settings for smooth operation and high efficiency.
Maintenance-free
Grease-filled and maintenance-free. No need to refuel and no restrictions on mounting position.
Motor Attachment Standardization
The PSR Series has standardized motor attachments for servo motors of various manufacturers, allowing the motor to be immediately installed after purchase.
Model
Ultra-Lightweight Thin Differential Reducer
PSL | 1 |
---|---|
70 | 2 |
F | 3 |
C | 4 |
A | |
19 | 5 |
A01 | 6 |
08 | 7 |
1.Product Name | PSL series |
---|---|
2.Frame number | 70,110 |
3.Output shaft shape | F:Flange output S:Shaft output |
4.Input shaft shape | C: Clamp |
5.Reduction ratio | Frame number 70:19,39,49 Frame number 110:19,39,59 |
6.Motor mounting code | Please refer to the dimension table or motor and reducer compatibility table.(Catalog: P19-25) |
7.Input shaft hole diameter | Please refer to the specification table.(Catalog: P17) |
Specifications
Model |
---|
PSL70 | PSL110 |
---|
Reduction ratio | |
---|---|
Rotational direction of output axis to input axis | |
Allowable rated torque | N・m |
Acceleration peak torque | N・m |
Maximum instantaneous torque | N・m |
Allowable average number of input revolutions | rpm |
Max input rpm | rpm |
Backlash | arcmin |
Recommendable motor capacity | W |
Input axis equivalent inertia moment | x10-4 kg・m2 |
Input shaft hole diameter | mm |
Mass (without motor attachment) | kg |
Outline Drawing (F type, S type) | |
CAD Data | |
Catalog | |
Instruction Manual |